International Journal on

Sciences and Techniques of Automatic control & computer engineering

 

Discover the most important research findings from academics, scientific and industrials …

• Description and System Identification • Analysis and automatic Control of Systems

• Electrical Machines and Networks  • Supervision and Human-machine Systems 

• Imagery, Robotics and Mecatronics • Industrial and Agricultural Applications • Embedded System

Description
The objective of the International Journal on Sciences and Techniques of Automatic control & computer engineering (IJ-STA) is to publish original papers of permanent reference value in all fields of electrical, computer engineering and systems. This journal selects, for publication, the best papers presented at the international conference on Sciences and Techniques of Automatic control and computer engineering. (STA). The international journal IJ-STA covers strongly related research areas Sciences, Techniques of Automatic control, and computer engineering systems. The backgrounds of the subscribers to the international journal IJ-STA are diversified and include industrial processes (thermal, hydraulics, biotechnical etc.), irrigation systems, greenhouses, mobile robots, articulated mechanical systems, biotechnology, aerospace, aeronautic, control engineering, etc. The international journal IJ-STA provides then a very strong synergy effect throughout the interdisciplinary research and varied application areas.

 

The scope of the journal includes:

The international journal IJ-STA publishes papers on theoretical analysis, experimental studies and applications in the field of automatic control and computer engineering. The Topics of interest include, but are not limited to:

 

Adaptive control

Agricultural processes

Artificial vision

Automotive control

Biomedical control systems

Biotechnological processes

Communication systems

Control architectures

Digital and analogue control

Discrete-event systems

Distributed systems

Decentralized control

Education and training

Electrical machines

Electrical networks

Embedded systems

Estimation and prediction

Evolutionary computation

Fault diagnosis systems

Fault-tolerant systems

Fuzzy systems

Hybrid systems

Image processing

Industrial automation

Industrial networking

Intelligent control systems

Large-scale systems

Manufacturing systems

Measurement engineering

Mechatronics

Modeling and simulation

Multivariable systems

Neural networks

Networked systems

Non-linear systems

Optimal control

Power systems control

Process control

Predictive control

Real-time control

Robotics

Robust control

Sensors and actuators

Signal processing

Smart structures control

Stochastic systems

Supervision systems

System identification

 

Honorary Editor:

  • Pr. Mohamed KAMOUN, National School of Engineering of Sfax, Tunisia

  • Pr. Ahmed TOUMI, National School of Engineering of Sfax, Tunisia

Editors in chief:

  • Pr. Mohamed CHAABANE, National School of Engineering of Sfax, Tunisia

E-mail: Mohamed.chaabane@sta-tn.com, chaabane_uca@yahoo.fr

  • Pr. Yassine KOUBAA, National School of Engineering of Sfax, Tunisia

E-mail: Yassine.koubaa@enis.rnu.tn

Publishing Editors:

  • Pr. Abdessattar CHAARI, National School of Engineering of Sfax, Tunisia

Address: Department of Electrical Engineering, Research Unit of Automatic Control, National School of Engineering of Sfax, University of Sfax, Route Soukra Km 3.5, B.P. 1173, 3038 Sfax, Tunisia

 Publishing coordinator: 

Mr. Maher KHARRAT, National School of Electronics and Telecommunications of Sfax (ENET'COM), Tunisia.

E-mail: maherkharrat@yahoo.fr; maherkharrat@enetcom.usf.tn

 

Address: Department of Electrical Engineering, Research Unit of Automatic Control, National School of Engineering of Sfax, University of Sfax, Route Soukra Km 3.5, B.P. 1173, 3038 Sfax, Tunisia

 

Editorial Board

  • Pr. Mohamed ABID, Engineering School of Sfax, University of Sfax,  Tunisia.

  • Pr. Mohamed Adel ALIMI, Engineering School of Sfax, University of Sfax, Tunisia.

  • Pr. Marc ANTONINI, I3S-CNRS, University of Nice, France.

  • Pr. Khaled belarbi, LAR, University of Constantine, Algeria.

  • Pr. Ridha BEN ABDENNOUR, Engineering School of Gabes, University of Gabes, Tunisia.

  • Pr. Mohamed BENREJEB, National School of Engineering of Tunis, Tunisia.

  • Pr. Jacques BERNUSSOU, LAAS/CNRS, University of Paul Sabatier Toulouse, French.

  • Pr. Abdellah BENZAOUIA, Faculty of Science Semlalia, Marrakech, Morocco.

  • Pr. Jacques BERNUSSOU, LAAS/CNRS, Universitι Paul Sabatier Toulouse, France.

  • Pr. Gιrard BLOCH, CRAN-ESSTIN, University of Nancy, France.

  • Pr. Mohamed BOUSSAK, EC-M, University of Marseille, France

  • Pr. Mohamed CHTOUROU, National School of Engineering of Sfax, Tunisia.

  • Pr. Nabil DERBEL, National School of Engineering of Sfax, Tunisia.

  • Pr. Rachid DHIFAOUI, INSAT of Tunis, University of Tunis, Tunisia.

  • Pr. Ahmed EL HAJJAJI, CREA, University of Amiens, France.

  • Pr. Gιrard FAVIER, I3S-CNRS, University of Nice, France.

  • Pr. Salim Filali, LAR, University of Constantine, Algeria.

  • Pr. Farhat FNAIECH, ESSTT, University of Tunis, Tunisia.

  • Pr. Germain GARCIA, LAAS/CNRS, Universitι Paul Sabatier Toulouse, France.

  • Pr. Mohamed Ben Ali KAMOUN, National School of Engineering of Sfax, Tunisia.

  • Pr. Mekki KSOURI, Engineering School of Tunis, University of Tunis, Tunisia.

  • Pr. Didier MAQUIN, CRAN-ENSEM-INPL, University of Nancy, France.

  • Pr. Driss MEHDI, LAII /ESIP, University of Poitiers, France.

  • Pr. Ricardo A. Ramirez Mendoza, ITESM, Campus Monterrey, Mexico.

  • Pr. Fouad MESQUINE, Faculty of Science Semlalia, Marrakech, Morocco.

  • Pr. Lamine MILI, Virginia Polytechnic Institute (VPI), USA.

  • Pr. Radhi M’HIRI, Faculty of Science Tunis, University of Tunis, Tunisia.

  • Pr. Faouzi M’Sahli, Engineering School of  Monastir, University of Monastir, Tunisia.

  • Pr. Mohand OUHROUCHE, University of Quebec at Chicoutimi, Canada.

  • Pr. Dumitru POPESCU, University of  Politehnica of Bucharest.

  • Pr. Maarouf SAAD, School of higher technology, University of Quebec, Canada.

  • Pr. Fernando TADEO, Universidad de Valladolid, Prado de la Magdalena,Valladolid, Spain.

  • Pr. Jalel ZRIDA, ESSTT, University of Tunis, Tunisia.

Information for authors

The International Journal on Sciences and Techniques of Automatic control offers an opportunity to contributors to publish their original research papers and review articles that detail the most important and the most recent technological advances in core areas of electrical, computer engineering and systems, as well as related disciplines. The editors invite academics, scientific and industrials to submit original papers by e-mail to the publishing editors, while respecting the guidelines for authors.

Besides, the scientific committee of international conference STA selects some best presented papers in all fields of the conference. Notified authors who accept to publish their works in the international conference STA will be requested to send an extended version of their papers to the publishing editors. Only papers reviewed and accepted by the Editorial Board of journal IJ-STA will be published.

It is to note that the manuscript must be limited to 15 pages (including figures and appendices), in the format of STA conference.

Authors of accepted manuscripts are requested to send a short biography (less than 150 words) and a photograph (jpeg format).

 

Copyright notice

Copyright for accepted articles for publication in IJ-STA is available on the website (COPYRIGHT_IJ-STA.doc), to ensure both the widest dissemination and protection of material published in IJ-STA journal. Authors are asked to assign world-wide copyright in both print and other media in their papers, including abstracts, to IJ-STA. This enables us to guarantee copyright protection against infringement, and to disseminate your article, and our journals, as widely as possible.

A copyright transfer must be filled and signed by the authors and sent back to the publishing editors. A scanned copy of the signed format may be accepted by e-mail.

 

Bibliographic & ordering Information

ISSN: 1737-7749

Edition: Academic Publication Center, CPU, Tunisia.

First issue will be published on may, 2007.

 

Subscription information:

If you wish to subscribe to our international journal IJ-STA, please fill in and send us the order form together with due payment:

 

ORDER FORM

I wish to receive / continue to receive a subscription to: International Journal on

Sciences and Techniques of Automatic control & computer engineering - IJ-STA

Name: ….………………………………………………………………….……

…………………………….….…….……………….........................................

Affiliation (University / Company Name): ………….………………………….…

………………….………………………………………………………………

………………………………..…………………….…………………...........

Yes  £          No   £         Sample copy £            check: £  Renewh           

                                                                                           £  New

                                                                                           £  Address change 

  

                                                                                   two issues yearly .... £

N° of subscription ………….. Price ………… For

postage included.                                                        single issue…............£

 

 

Address: ..………………………………………………………………………

….…………………………………………….………………………………

……………………………………………………….…………………..……

…………………..….…………………………………………………............

Telephone: ….……………………………………………………………….....

…………………………………………………................................................

E-mail: …………………………………………………………………………

…………………………………………………………....................................

Payment has to be made by Bank Transfer or order form made payable to:

Association Tunisienne des Techniques  Numιriques et de l’Automatique

Bank : Sociιtι Tunisienne de Banque ; Agence: Sfax Hached

Account Number : STB    10 700 039 2028 301788 82

Swift code : STB KTNTT 940

IBAN : TN 59 1070 0039 2028 3017 8882                                 

&n 

 

Standard subscription rates one Year (2017) 

Individual: one Year 140 € (200 DT)  

Institutional: one Year 160 € (300 DT)

 

Single Issue Rates (2017)

Individual: 80 € (120 DT)

Institutional: 140 € (200 DT)

 

Address: font>Department of Electrical Engineering, Automatic Control Unit, National School of Engineering of Sfax, University of Sfax, B.P. 1173, 3038 Sfax, Tunisia.

For more information, contact the Publishing Editors of the International Journal on Sciences and Techniques of Automatic control & computer engineering :

Publishing Editors:

  • Pr. Abdessattar CHAARI, National School of Engineering of Sfax, Tunisia

E-mail: abdessattar2004@yahoo.fr;

Address: Department of Electrical Engineering, Research Unit of Automatic Control, National School of Engineering of Sfax, University of Sfax, Route Soukra Km 3.5, B.P. 1173, 3038 Sfax, Tunisia

On-line Review

Volume (1), Number (1), June, 2007

  Volume (1), Number (2), December, 2007
 

Volume (1), Special Issue, December 2007

  Volume (2), Number (1), July, 2008
 
        Volume (2), Special issue on CEM, December 2008   Volume (2), Number (2), December, 2008
 
       Volume (3), Number (1), July, 2009    Volume (3), Number (2), December, 2009
 
      Volume (4), Number (1), July, 2010   Volume (4), Number (2), December, 2010
 
     Volume (5), Number (1), June, 2011   Volume (5), Number (2), December, 2011
 
     Volume (6), Number (1), June, 2012   Volume (7), Number (1), April, 2013
 
     Volume (8), Number (1), April, 2014   Volume (9), Number (1), December, 2015
 
     Volume (10), Number (1), Special Issue AND, April, 2016   Volume (10), Number (2), Special Issue ESA, July, 2016
 
    Volume (11), Number (1), June, 2017